Keystone Electronics Corp has battery holders, fuse clips & holders, micro pins & jacks, quick-fit terminals, plugs & jacks, screw terminals, LED spacers, instrument handles, plus much more.
Filters
Display 10 20 50 per page
Product Code: K567
UOM: EACH
Length: 19.1mm
Diameter: 3.2mm
Phono plug mates with 1/8" (3.18mm) diameter jacks. Crimp mount for solderless installation.
Product Code: K566
UOM: EACH
Length: 22.23mm
Diameter: 9.53mm
Phono plug mates with 1/8" (3.18mm) diameter jacks. Crimp mount for solderless installation.
Product Code: K561
UOM: EACH
Length: 27mm
Diameter: 9.09mm
Phono plug mates with 1/8" (3.18mm) diameter jacks. Swage mount for long term solderless connections.
Product Code: K961H
UOM: EACH
Length: 11.65mm
Width: 3.2mm
Height: 4mm
8-pin connectors for ethernet port K986. Supplied assembled with 6" (152.4mm) long cables. Cable size 26AWG.
Product Code: K60
UOM: EACH
Polarising washers prevent improper connection of battery which may cause damage to electronic equipment. For "AA", "C" & "D" battery clips.
Product Code: K59
UOM: EACH
Polarising washers prevent improper connection of battery which may cause damage to electronic equipment. For "AA", "C" & "D" battery clips.
Product Code: K58
UOM: EACH
Length: 34.9mm
Width: 6.4mm
Label for indicating polarity. Pressure sensitive adhesive back. No gluing or wetting needed. Recommended where proper polarity of battery insertion or circuit polarity is to be shown. Positive side indicated with a red arrow; negative side blue.
Product Code: K96
UOM: EACH
Length: 24.38mm
Width: 9.5mm
Height: 3.05mm
Protects 9 Volt Batteries and battery Packs when not in use. Snaps onto the battery's male/female snap-on connector and minimizes the likelihood of physical damage. Prevents unwanted electrical discharge.
Product Code: K3383
UOM: EACH
Length: 4.8mm
Diameter: 1.5mm
Mounting Hole Diameter: 1.7mm Use Drill #51
Brass rivets for when conductivity is required in a fastening.
Product Code: K3385
UOM: EACH
Length: 4.8mm
Diameter: 2.21mm
Mounting Hole Diameter: 2.36mm Use Drill #42
Brass rivets for when conductivity is required in a fastening.