Keystone

Anvils for fork type terminals. Accepts Diameter of 3/32" (2.38mm) to 5/32" (3.97mm) at one end and diameter of 3/16" (4.76mm) other end. .040" (1.02mm) slot one end and .060" (1.52mm) slot at other end.

Hold .250" (6.4mm) diameter anvils for use in drill or arbor press. For use in vices, Arbors, kickpresses, punch presses etc. Include a holder, 2 washers and wing nut plus instructions. May be used with receding pins & springs for eyelet assembly.

.069" (1.75mm) Diameter receding pins to be used with the following products: Anvil holder K1719, Anvil K1722 and Return spring K1321.

.045" (1.14mm) Diameter receding pins to be used with the following products: Anvil holder K1719, Anvil K1722 and Return spring K1321.

Staking tool for Single End terminals, Eyelets or Rivets. For Double End (Feed Thru) terminals. Fits .180" (4.57mm) through .190" (4.83mm) diameter shanks. Hole in Tool fits over pin head and securly stakes the rivet part of the terminals.

The top ends of swage staking tools for .062" (1.57mm) to 0.98" (2.49mm) diameter shanks. For Single End terminals, Eyelets or Rivets.

The top ends of swage staking tools for .110" (2.79mm) to .125" (3.18mm) diameter shanks. For Single End terminals, Eyelets or Rivets.

Hexagonal female threaded spacer secures with screws. Economical for terminal or printed circuit board supports. Moulded from zinc plated brass.

SMT mounted standoffs for stable soldering. Packaged on tape and reel. 1000 pieces.

SMT mounted standoffs for stable soldering. Packaged on tape and reel. 1500 pieces.