Micro Plastics Inc is the world's largest manufacturer of nylon fasteners, featuring; screws, bolts & threaded rod, nuts, washers & screw insulators, nylon spacers & PCB mounts, panel clips & fasteners, wire positioning hardware & accessories, circuit board hardware.
Filters
Display 10 20 50 per page
Product Code: 0625020WN
UOM: EACH
Width: 34.54mm
Height: 18.03mm
Diameter: 16.51mm
Internal Hole Diameter: 9.14mm
Thread Pitch: ¼-20
Standard wing-shaped nuts to easily grip and cap off a screw installation.
Product Code: 0601024WN
UOM: EACH
Width: 22.86mm
Height: 12.19mm
Diameter: 10.16mm
Internal Hole Diameter: 5.84mm
Thread Pitch: 10-24
Wing nuts provide electrical insulation, vibration, and corrosion resistance. They have a low thermal conductivity, are non-magnetic, and have a high strength-to-weight ratio. Temperature Range: -40°C to 105°C. Moulded from natural nylon 66. Flammability rating: UL 94V-2.
Product Code: 06M120175WN
UOM: EACH
Length: 44.7mm
Height: 22.7mm
Diameter: 21.1mm
Internal Hole Diameter: 15mm
Thread Pitch: M12 x 1.7mm
Standard wing-shaped nuts to easily grip and cap off a screw installation.
Product Code: 0650013WN
UOM: EACH
Width: 44.7mm
Height: 22.86mm
Diameter: 21.59mm
Internal Hole Diameter: 14.22mm
Thread Pitch: ½-13
Standard wing-shaped nuts to easily grip and cap off a screw installation.
Product Code: 0601032WN
UOM: EACH
Width: 22.86mm
Height: 16mm
Diameter: 10.16mm
Thread Pitch: 10-32
Wing nuts provide electrical insulation, vibration, and corrosion resistance. They have a low thermal conductivity, are non-magnetic, and have a high strength-to-weight ratio. Temperature Range: -40°C to 105°C. Moulded from natural nylon 66. Flammability rating: UL 94V-2.
Product Code: 0625028WN
UOM: EACH
Width: 34.54mm
Height: 18.03mm
Diameter: 16.51mm
Internal Hole Diameter: 9.14mm
Thread Pitch: ¼-28
Standard wing-shaped nuts to easily grip and cap off a screw installation.
Product Code: 0637516WN
UOM: EACH
Width: 34.8mm
Height: 18.29mm
Diameter: 16.26mm
Thread Pitch: 3/8-16
Standard wing-shaped nuts to easily grip and cap off a screw installation.
Product Code: 0656212WN
UOM: EACH
Width: 44.7mm
Height: 22.86mm
Diameter: 21.59mm
Thread Pitch: 9/16-12
Standard wing-shaped nuts to easily grip and cap off a screw installation.
Product Code: 06M030050WN
UOM: EACH
Length: 22.9mm
Height: 12.2mm
Diameter: 10.2mm
Internal Hole Diameter: 5.8mm
Thread Pitch: M3 x 0.5mm
Standard wing-shaped nuts to easily grip and cap off a screw installation.
Product Code: 0600832WN
UOM: EACH
Width: 22.86mm
Height: 12.19mm
Diameter: 10.16mm
Thread Pitch: 8-32
Standard wing-shaped nuts to easily grip and cap off a screw installation.