Micro Plastics Inc is the world's largest manufacturer of nylon fasteners, featuring; screws, bolts & threaded rod, nuts, washers & screw insulators, nylon spacers & PCB mounts, panel clips & fasteners, wire positioning hardware & accessories, circuit board hardware.
Filters
Display 10 20 50 per page
Product Code: 50M035060D008
UOM: EACH
Height: 2.4mm
Diameter: 6mm
Thread Pitch: M3.5 x 0.6mm
Machine screws with a cylindrical "cheese" shaped head. Slotted for use with flat head screwdrivers.
Product Code: 50M035060D010
UOM: EACH
Height: 2.4mm
Diameter: 6mm
Thread Pitch: M3.5 x 0.6mm
Machine screws with a cylindrical "cheese" shaped head. Slotted for use with flat head screwdrivers.
Product Code: 010832CD050
UOM: EACH
Height: 2.67mm
Diameter: 8.74mm
Thread Pitch: 8-32
Machine screws with a binder head. Designed for use with both phillips and flat head screwdrivers.
Product Code: 010832CD062
UOM: EACH
Height: 2.67mm
Diameter: 8.74mm
Thread Pitch: 8-32
Combo binder head machine screws provide electrical insulation, vibration, and corrosion resistance. They have a low thermal conductivity, are non-magnetic, and have a high strength-to-weight ratio. Combination head fits both phillips and flat head screw drivers. Temperature Range: -40°C to 105°C. Moulded from natural nylon 66. Flammability rating: UL 94V-2.
Product Code: 50M030050I010B
UOM: EACH
Height: 1.7mm
Diameter: 6.3mm
Thread Pitch: M3 x 0.5mm
Countersunk Flat headed machine screws for use with phillips head screwdrivers.
Product Code: 50M030050I005B
UOM: EACH
Height: 1.7mm
Diameter: 6.3mm
Thread Pitch: M3 x 0.5mm
Countersunk Flat headed machine screws for use with phillips head screwdrivers.
Product Code: 50M040070I020B
UOM: EACH
Height: 2.7mm
Diameter: 9.4mm
Thread Pitch: M4 x 0.7mm
Countersunk Flat headed machine screws for use with phillips head screwdrivers.
Product Code: 50M040070I006B
UOM: EACH
Height: 2.7mm
Diameter: 9.4mm
Thread Pitch: M4 x 0.7mm
Countersunk Flat headed machine screws for use with phillips head screwdrivers.
Product Code: 50M025045I006B
UOM: EACH
Height: 1.5mm
Diameter: 5.5mm
Thread Pitch: M2.5 x 0.45mm
Countersunk Machine screws with a flat head. For use with a phillips head screwdriver.
Product Code: 50M030050I006B
UOM: EACH
Height: 1.7mm
Diameter: 6.3mm
Thread Pitch: M3 x 0.5mm
Countersunk Flat headed machine screws for use with phillips head screwdrivers.